TH-MIXVENT

TH-MIXVENT

Roof mounted mixed flow fans TH-MIXVENT Series

Range of roof mounted mixed flow fans supplied as standard for extract operation. The models 500 and 800 are manufactured from high strength injection moulded plastic, and models 1300 and 2000 from high grade pressed sheet steel.The bases are manufactured from sheet steel.The cowls are manufactured from pressed sheet steel (500 and 800 models) or spun aluminium (1200 and 2000).
All models incorporate a bird guard and base cable gland entry point as standard. All metallic parts are protected with a black epoxy-polyester weatherproof paint coating. The motor and impeller casing can be easily removed by 2 fixing clamps.

ATTRIBUTES

 

Flame retardant terminal box
Very accessible wiring terminal box in flame retardant plastic V0, with capacitor located inside.

 

Circular spigot coupling
Circular spigot coupling to facilitate the connection of circular, rigid or flexible ducting.

 

Bird-proof guard

 

 

DOWNLOADS

Catalogue series

Instructions Manual

Instructions Manual 2

Quick Comparison

SettingsTH-MIXVENT removeTD-SILENT removeVENT-NK / VENT-N removeDOMEO removeRESPIRO removeTD-SILENT ECOWATT remove
NameTH-MIXVENT removeTD-SILENT removeVENT-NK / VENT-N removeDOMEO removeRESPIRO removeTD-SILENT ECOWATT remove
Image
SKU
Rating
Price
Stock
Availability
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

Description

Roof mounted mixed flow fans TH-MIXVENT Series

Range of roof mounted mixed flow fans supplied as standard for extract operation. The models 500 and 800 are manufactured from high strength injection moulded plastic, and models 1300 and 2000 from high grade pressed sheet steel.The bases are manufactured from sheet steel.The cowls are manufactured from pressed sheet steel (500 and 800 models) or spun aluminium (1200 and 2000). All models incorporate a bird guard and base cable gland entry point as standard. All metallic parts are protected with a black epoxy-polyester weatherproof paint coating. The motor and impeller casing can be easily removed by 2 fixing clamps.

TD-SILENT Series

Models 160 to 1000 Low profile “Mixed-flow” fans with soundabsorbent insulation. Extremely quiet. Certified of Approval Noise Abatement Society (TD-350, TD-500, TD-800 and TD-1000 models). Manufactured in plastic material, with a specifically designed internal skin to direct the sound waves at the right angle for them to be captured by the sound-absorbent material (1). Fitted with rubber gaskets on the inlet and outlet to absorb vibrations, a body that can be dismantled. Connection box can be rotated 360º, to facilitate easy connection of the power cable.

Centrifugal In-Line Fans VENT-NK / VENT-N series

Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a prewired wiring junction box and a robust mounting foot. All model include an enclosed type, single-phase external rotor motor with factory matched backward curved nonstalling impeller. (1) Models 355 and 400 are manufactured in sheet steel protected against corrosion by cataforesis primer and black polyester paint finish.

Counter-flow, high-efficiency heat recovery unit DOMEO 210 Series

Whole house heat recovery unit with a high-efficiency heat exchanger up to 92% setting and very low consumption EC motor. Provides a constant supply of fresh tempered air into the living spaces of a house. 

Single Room Heat Recovery RESPIRO Series

Decentralized ventilation unit, with heat recovery, for single rooms in domestic or commercial applications. Elegant design that allows its adaptation to any environment. Brushless motor with low comsumption electronic control.

 

Ultra-quiet circular duct fans TD-SILENT ECOWATT Series

Models 350 to 1000 Low profile “Mixed-flow” fans with sound-absorbent insulation, extremely quiet, fan casing manufactured in plastic material, with a specially designed internal skin to direct the sound waves at the right angle for them to be captured by sound-absorbent material, fitted with flexible rubber seals on the inlet and outlet to absorb vibrations, with an external connection box, a body that can be removed without dismantling the adjacent ducting and therefore facilitating any installation or maintenance. Fan speed 100% adjustable with the potentiometer placed in the connection box or with an external control type REB-ECOWATT.
Content
ATTRIBUTES
  Flame retardant terminal box Very accessible wiring terminal box in flame retardant plastic V0, with capacitor located inside.   Circular spigot coupling Circular spigot coupling to facilitate the connection of circular, rigid or flexible ducting.   Bird-proof guard    
DOWNLOADS
Catalogue series Instructions Manual Instructions Manual 2
 
DOWNLOADS
Catalogue series Instructions Manual 2
ATTRIBUTES
Mounting foot Supplied with unit as standard (100N-315N models).  
DOWNLOADS
Catalogue series Instructions Manual Instructions Manual 2
ATTRIBUTES
    Controller Remote control included in the product. Allows regulation of: - Boost function (RD and APP models) - By-pass - Polluted filters alarm - Unoccupied mode (RD and APP models)
 
  Very compact
 
  Easy access to filters
    Easy to access: fans, heat exchanger and by-pass.     Connectair Through the optional SPCM module, the unit can access Connectair, S&P's IoT that provides access to a new way to enjoy your ventilation.  
DOWNLOADS
Catalogue series Instructions Manual
ATTRIBUTES
   
Remote control of model RESPIRO RD 3 speeds Humidity control Modes: - Only extraction - Only supply - Reversing impulsion and extraction. - Security is only activated if humidity exceeds the limit.    
  Ceramic heat exchanger with performance up to 93%, protected with a G3 filter at both ends.       Internal front cover of elegant design, which allows adaptation to any environment.  
 
 
DOWNLOADS
Catalogue series Instructions Manual
 
DOWNLOADS
Catalogue series Instructions Manual Instructions Manual 2
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information