Centrifugal extractors manufactured from sheet steel with an epoxy polyester paint finished. All extractors are fitted with centrifugal impeller and single phase 230V 50Hz speed controllable motor.

 

Range of in-line fans for circular ducts, designed for high aerodynamic performances with a very compact profiles and very low sound levels.The range comprises 7 diameters and covers a flow range from 260 to 1080 m3/h.

Range of in-line fans for circular ducts, designed for high aerodynamic performances with a very compact profiles and very low sound levels. Low profile compact casing manufactured from galvanised sheet steel. The terminal box and the mounting bracket do not increase the product’s profile. Optimised design of the impeller, guide vane and outlet diffuser, manufactured from injection-moulded plastic, to increase performance and lower the sound level. Airtight joint between the galvanised steel casing and the plastic guide vane to avoid air leaks. Rubber gaskets on the flanges to improve airtightness with the ducts. Silent-block between the motor and the holder to reduce the motor’s vibrations and lower the sound level of the installation, even in terms of speed regulation. IP65 terminal box allowing outdoor installation.

Range of axial flow fans designed to exhaust air directly to the outside. All the fans are manufactured from injection moulded plastic and fitted with automatic shutter and single phase 230V-50Hz, class B motor, thermal protection, “fuse”.

Heat recovery units with high-efficiency counterflow aluminium plate heat exchanger (up to 88%) certified by Eurovent, mounted in a galvanised steel double-walled enclosure with internal thermo-acoustic fireproof insulation (A1/M0) made of 25 mm thic

Whole house heat recovery unit for single dwelling houses, with crossflow heat exchanger. It guarantees continuous air replacement in single dwelling houses up to 90% of efficiency. Equipped with 2 centrifugal fans (a supply and an extract fan)