AMB-Φ42

AMB-Φ42

AMB-Φ42

Jet nozzle, made by plastic, with adjustable head in any direction. Active diameter 42mm. It is produced only in some colors. For wall (for cooling and heating) or ceiling (only for heating, for air-curtain or to avoid condensation in glass surfaces) installation.

 

 

Is available in the following executions:

 

AMB-RP-Φ42: For single installation in round hole. With round frame.

AMB-AP-Φ42: Set of many jet nozzles in rectangular frame made by aluminium, anodized or painted electrostatically in RAL color. Only the adjustable heads of the plastic jet nozzles (they are produced in certain colors) are visible.

AMB-AP-Φ42-D/DK: Set of many jet nozzles in rectangular frame made by aluminium, anodized or painted electrostatically in RAL color. Only the adjustable heads of the plastic jet nozzles (they are produced in certain colors) are visible. With air volume control damper with simultaneously opposite rotated blades (-D) or flap type (-DK).

AMB-AP-SR-Φ42: Set of many jet nozzles, in rectangular frame, curved for direct installation in the side of round air duct. The frame is manufactured by sheet steel galvanized or painted electrostatically in RAL color. Only the adjustable heads of the plastic jet nozzles (they are produced in certain colors) are visible.

AMB-AP-SR-Φ42-D/DK: Set of many jet nozzles, in rectangular frame, curved for direct installation in the side of round air duct. The frame is manufactured by sheet steel galvanized or painted electrostatically in RAL color. Only the adjustable heads of the plastic jet nozzles (they are produced in certain colors) are visible. With air volume control damper with simultaneously opposite rotated blades (-D) or flap type (-DK).

AMB-AP-Φ42-AUTH: Set of many jet nozzles in rectangular subframe made by aluminium, anodized or painted electrostatically in RAL color. The subframe is rotated up and down in relation with the external frame. The external frame is also made by aluminium, anodized or painted electrostatically in RAL color. Only the adjustable heads of the plastic jet nozzles (they are produced in certain colors) are visible. With mechanism for the automatic adjustment of the subframe angle according to the supply air temperature. Maximum dimension 8X2 jets.

AMB-AP-Φ42-ON OFF 220V: Set of many jet nozzles in rectangular subframe made by aluminium, anodized or painted electrostatically in RAL color. The subframe is rotated up and down in relation with the external frame. The external frame is also made by aluminium, anodized or painted electrostatically in RAL color. Only the adjustable heads of the plastic jet nozzles (they are produced in certain colors) are visible. The subframe angle is adjusted by electric actuator ON OFF 220V. Maximum dimension 10X2 jets.

AMB-AP-Φ42- ANALOGUE 24V: Set of many jet nozzles in rectangular subframe made by aluminium, anodized or painted electrostatically in RAL color. The subframe is rotated up and down in relation with the external frame. The external frame is also made by aluminium, anodized or painted electrostatically in RAL color. Only the adjustable heads of the plastic jet nozzles (they are produced in certain colors) are visible. The subframe angle is adjusted by electric actuator ANALOGUE 24V. Maximum dimension 10X2 jets.

 

DOWNLOADS

AMB-Φ42

 

Quick Comparison

SettingsAMB-Φ42 removeGR removeFDMA removeE17 removeD removeMLD remove
NameAMB-Φ42 removeGR removeFDMA removeE17 removeD removeMLD remove
Image
SKU
Rating
Price
Stock
Availability
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

Description

AMB-Φ42

Jet nozzle, made by plastic, with adjustable head in any direction. Active diameter 42mm. It is produced only in some colors. For wall (for cooling and heating) or ceiling (only for heating, for air-curtain or to avoid condensation in glass surfaces) installation.
 

GR

Ceiling swirl diffuser, for supply air, with front plate made by steel sheet electrostatically painted in RAL color or anodized aluminium in natural color. With openings for air distribution radial placed. In each opening there is one blade plastic, in color black RAL 9005 or white RAL 9010. The blades are adjustable manually for regulation of the air jet pattern. For use in heating and cooling cases. For low up to high installation height and air volume supply. In the swirl mode he air is supplied in the same way to all directions (360o).
 

FDMA

FDMA – The Damper in the HVAC equipment duct that prevents the spread of fire and combustion products from one fire segment to another by shutting off the airflow at the fixture points.
 

E17

Linear, light type, wall grille for supply or return air made by anodized aluminium. The blades are fixed and 12mm spaced. For throw straight or 15o deflected (E12-15ο) . Electrostatic paint in RAL color is possible. The blades are parallel to the first mentioned dimension.
 

D

Multiple leaf air volume control damper for installation in the majority of grilles or diffusers. Made by aluminium. With simultaneously opposite rotated blades. The regulation is possible from the front of the grille/diffuser with screwdriver or a handle.
 

MLD

Round, supply air, swirl diffuser. For use in heating and cooling cases. For low up to high installation height and air volume supply. The air is supplied in the same way to all directions (360o). With frame made by aluminium and eight trapezoid adjustable blades made by steel sheet. The blades are simultaneously rotated, for alteration of the air jet. Painted in RAL color. In the center there is a removable cup, when we remove it we see an arrow which indicates the angle of the blades. Installation in false ceiling or visible air duct is possible. The regulation of the blades angle is manual.
 
Content
 
Is available in the following executions:   AMB-RP-Φ42: For single installation in round hole. With round frame. AMB-AP-Φ42: Set of many jet nozzles in rectangular frame made by aluminium, anodized or painted electrostatically in RAL color. Only the adjustable heads of the plastic jet nozzles (they are produced in certain colors) are visible. AMB-AP-Φ42-D/DK: Set of many jet nozzles in rectangular frame made by aluminium, anodized or painted electrostatically in RAL color. Only the adjustable heads of the plastic jet nozzles (they are produced in certain colors) are visible. With air volume control damper with simultaneously opposite rotated blades (-D) or flap type (-DK). AMB-AP-SR-Φ42: Set of many jet nozzles, in rectangular frame, curved for direct installation in the side of round air duct. The frame is manufactured by sheet steel galvanized or painted electrostatically in RAL color. Only the adjustable heads of the plastic jet nozzles (they are produced in certain colors) are visible. AMB-AP-SR-Φ42-D/DK: Set of many jet nozzles, in rectangular frame, curved for direct installation in the side of round air duct. The frame is manufactured by sheet steel galvanized or painted electrostatically in RAL color. Only the adjustable heads of the plastic jet nozzles (they are produced in certain colors) are visible. With air volume control damper with simultaneously opposite rotated blades (-D) or flap type (-DK). AMB-AP-Φ42-AUTH: Set of many jet nozzles in rectangular subframe made by aluminium, anodized or painted electrostatically in RAL color. The subframe is rotated up and down in relation with the external frame. The external frame is also made by aluminium, anodized or painted electrostatically in RAL color. Only the adjustable heads of the plastic jet nozzles (they are produced in certain colors) are visible. With mechanism for the automatic adjustment of the subframe angle according to the supply air temperature. Maximum dimension 8X2 jets. AMB-AP-Φ42-ON OFF 220V: Set of many jet nozzles in rectangular subframe made by aluminium, anodized or painted electrostatically in RAL color. The subframe is rotated up and down in relation with the external frame. The external frame is also made by aluminium, anodized or painted electrostatically in RAL color. Only the adjustable heads of the plastic jet nozzles (they are produced in certain colors) are visible. The subframe angle is adjusted by electric actuator ON OFF 220V. Maximum dimension 10X2 jets. AMB-AP-Φ42- ANALOGUE 24V: Set of many jet nozzles in rectangular subframe made by aluminium, anodized or painted electrostatically in RAL color. The subframe is rotated up and down in relation with the external frame. The external frame is also made by aluminium, anodized or painted electrostatically in RAL color. Only the adjustable heads of the plastic jet nozzles (they are produced in certain colors) are visible. The subframe angle is adjusted by electric actuator ANALOGUE 24V. Maximum dimension 10X2 jets.  
DOWNLOADS
AMB-Φ42  
 
Also is available in the following executions:   GR-AR: With square front plate and air outlets with circular circumference. GR-AR-D: With square front plate, air outlets with circular circumference and aluminium made, multiple leaf, air volume control damper with simultaneously opposite rotated blades. GR-AR-A: With square front plate (outside dimensions of front plate 595X595mm) and air outlets with circular circumference. Active size 300 or 400 or 500. GR-AR-A-D: With square front plate (outside dimensions of front plate 595X595mm), air outlets with circular circumference and aluminium made, multiple leaf, air volume control damper with simultaneously opposite rotated blades. Active size 300 or 400 or 500. GR-AA: With square front plate and air outlets with square circumference. GR-AA-D: With square front plate, air outlets with square circumference and aluminium made, multiple leaf, air volume control damper with simultaneously opposite rotated blades. GR-AA-A: With square front plate (outside dimensions of front plate 595X595mm) and air outlets with square circumference. Active size 300 or 400 or 500. GR-AA-A-D: With square front plate (outside dimensions of front plate 595X595mm), air outlets with square circumference and aluminium made, multiple leaf, air volume control damper with simultaneously opposite rotated blades. Active size 300 or 400 or 500. GR-B: With rectangular front plate and air outlets with rectangular circumference. GR-B-D: With rectangular front plate, air outlets with rectangular circumference and aluminium made, multiple leaf, air volume control damper with simultaneously opposite rotated blades GR-T: With square front plate and air outlets with circular circumference. The air outlets they are positioned in angle. GR-RR: With round front plate and air outlets with circular circumference GR-AR/AR-A/RR-AUTH: With mechanism for the automatic adjustment of the blades angle according to the supply air temperature. Only in the dimensions 300, 400, 500 and 600. In this case the front plate is made by steel sheet electrostatically painted in RAL color. GR-AR/AR-A/RR-ON-OFF 220V: With electric actuator on-off 220V for the adjustment of the blades angle. In this case the front plate is made by steel sheet electrostatically painted in RAL color. GR-AR/AR-A/RR-ANALOGUE 220V: With electric actuator analogue 24V for the adjustment of the blades angle. In this case the front plate is made by steel sheet electrostatically painted in RAL color. In the size 600 the outside dimension of the diffuser is 595X595mm end the active size 550. Upon request the outside dimension could be 625X625mm or 640X640mm with the same active size.  
DOWNLOADS
Part 1 Part 2 GR self adjusted or with actuator GR-T  
 
Characteristics   Dampers from 180 × 180 mm to 1 600 × 1 000 mm CE certified acc. to EN 15650 Tested in accordance with EN 1366-2 Classified acc. to EN 13501-3+A1 Fire resistance up to EIS 120 External Casing leakage class C / Internal leakage class 3 acc. to EN 1751 Corrosion resistant acc. to EN 15650 Cycling test in class C 10 000 acc. to EN 15650 Damper actuating mechanical or electrical Maximum air speed through opened damper of 12 m/s and pressure difference 1200 Pa Can be used in explosion-hazard environments      
Also is available in the following executions:
E12(-15ο)-D: With aluminium made, multiple leaf, air volume control damper with simultaneously opposite rotated blades. E12(-15ο)-E: Accessible. E12(-15ο)-FA: With air filter. E12(-15ο)-D-E: Accessible and with aluminium made, multiple leaf, air volume control damper with simultaneously opposite rotated blades. E12(-15ο)-D-FA: With air filter and aluminium made, multiple leaf, air volume control damper with simultaneously opposite rotated blades. E12(-15ο)-E-FA: Accessible, with air filter. E12(-15ο)-D-E-FA: Accessible, with air filter and aluminium made, multiple leaf, air volume control damper with simultaneously opposite rotated blades. E12(-15ο)-Τ1Κ: With one row of vertical adjustable blades, made by aluminium, in the back of the grille. E12(-15ο)-Τ1Κ-D: With one row of vertical adjustable blades, made by aluminium, in the back of the grille and aluminium made, multiple leaf, air volume control damper with simultaneously opposite rotated blades. E12(-15ο)-SR: For direct installation in the side of round air duct. With galvanised frame. E12(-15ο)-SR-D: For direct installation in the side of round air duct and aluminium made, multiple leaf, air volume control damper with simultaneously opposite rotated blades. With galvanised frame. E12(-15ο)-SR-DΚ: For direct installation in the side of round air duct and flap type damper. With galvanised frame. E12(-15ο)-L: Without frame. E12(-15ο)-Τ1Κ-L: Without frame. With one row of vertical adjustable blades, made by aluminium, in the back of the grille. The types E12/E12-D/E12-FA/E12-D-FA/E12-Τ1Κ/E12-Τ1Κ-D (and in the -15ο versions) is possible to be installed in metal plate (-SPQ) with external dimensions 595X595mm. In this case the plate and the diffuser are painted electrostatically in RAL color. This is possible only for the nominal diffuser dimensions 100X100, 125X125, 150Χ150, 200Χ200, 250Χ250, 300Χ300, 350Χ350, 400Χ400, 450Χ450 and 500Χ500.
   
DOWNLOADS
E17 part 1  E17 595mmx595mm 
 
Also is available in the following executions: D-ON/OFF 220V: Adjustable with electric actuator on/off 220V.  
DOWNLOADS
D  
 
Also is available in the following executions:   MLD-AUTH: With mechanism for the automatic adjustment of the blades angle according to the supply air temperature (not for size 630). MLD-ON-OFF 220V: With electric actuator on-off 220V for the adjustment of the blades angle (not for size 200). MLD-ANALOGUE 24V: With electric actuator analogue 24V for the adjustment of the blades angle (not for size 200). MLD-DW: With double round frame. MLD-DW-AUTH: With double round frame and mechanism for the automatic adjustment of the blades angle according to the supply air temperature. MLD-DW-ON-OFF 220V: With double round frame and electric actuator on-off 220V for the adjustment of the blades angle (not for size 200). MLD-DW-ANALOGUE 24V: With double round frame and electric actuator analogue 24V for the adjustment of the blades angle (not for size 200). All the types is possible to be installed in metal plate with external dimensions 595X595mm simple (-SPR). In this case the plate and the diffuser are painted electrostatically in RAL color. This is possible for MLD’s up to size 450 and for MLD-DW’s up to size 400.  
DOWNLOADS
MLD  
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information